View an amplification plot after a run
The status dial displays
Run complete
when a run is complete. The amplification
plot can only be viewed immediately after a run. After
Done
is tapped, the
amplification plot can no longer be viewed on the instrument.
If the automatic sign-out feature is enabled and the set time has elapsed, the
instrument will display the
Sign In
screen. The amplification plot cannot be viewed on
the instrument after the run.
1.
In the home screen after a run is complete, tap
Details
.
The amplification plot is displayed. The display can be adjusted (see “Adjust the
display of real-time plots during a run” on page 69).
2.
(Optional)
On the
Details
screen, tap the
Plot Types
dropdown list, then select a
plot type.
•
Rn vs. Cycle
•
dRn vs. Cycle
3.
(Optional)
On the
Details
screen, tap the
Y-Scales
dropdown list, then select
the view for the plot.
•
Linear
•
Log 10
4.
(Optional)
Tap
Well details
, then tap
Samples
or
Targets
.
5.
Select an amplification plot preview, then tap
View amp plot
.
6.
(Optional)
Tap a specific well on the right side of the amplification plot to see the
details for the single well.
7.
Tap
Close
to return to the home screen.
Chapter 6
View and manage files
Manage data files
6
QuantStudio
™
6 Pro and 7 Pro Real-Time PCR Systems User Guide
75
