(Optional)
Scan a barcode using a barcode scanner
The instrument is compatible with an optional Handheld Barcode Scanner
(Cat. No. 4488442, purchased separately). The barcode scanner reads
Code 128 (alphanumeric), which supports 128 ASCII character barcodes.
For safety information, see “Laser safety” on page 197.
1.
Tap the
Barcode
field.
2.
Hold the scanner 20–30 cm away from a plate or container label and aim at the
center of the barcode, then press the trigger.
3.
Slowly move the scanning beam across the barcode until the scanner emits a
high-pitched tone.
When the scanner scans a barcode, it automatically transmits the following
information:
• Transmits the alphanumeric equivalent of the barcode to the
Barcode
field.
• Transmits other reagent information.
For more information about the hand-held barcode scanner, see the user
documentation provided with the barcode scanner.
Load a plate into the instrument
IMPORTANT!
The instrument should be used by trained operators who have been
warned of the moving parts hazard.
CAUTION!
Use flat caps for 0.2-mL tubes and 0.1-mL tubes. Rounded caps can
damage the heated cover.
1.
Tap
(Eject)
to open the drawer.
2.
Load the plate onto the block.
• Well A1 of the plate is in the top-left corner of the block.
• If the plate has a barcode, the barcode faces the front of the instrument.
3.
Tap
(Eject)
to close the drawer.
Chapter 3
Create and run plates on the instrument
(Optional) Scan a barcode using a barcode scanner
3
50
QuantStudio
™
6 Pro and 7 Pro Real-Time PCR Systems User Guide
