Add facial authentication to an existing instrument profile
When a profile is set up for facial authentication, the photographs should reflect how
the user appears in the lab. For example, safety glasses should be worn to set up
facial authentication if safety glasses will be worn when signing in.
1.
Sign in.
See “Sign in with a PIN” on page 43.
2.
In the home screen, tap
(Profile)
4
Facial profile
4
Set up now
.
Note:
The instrument must be configured for facial authentication (see
“Configure the instrument for the hands-free features” on page 166). The
Facial
profile
button will not display if the instrument is not configured for facial
authentication.
3.
Prepare for the photographs, then tap
Next
.
4.
Center your face within the green frame, then tap
Start
.
Note:
You must position yourself close enough to the instrument so that the
green frame shows only your face without any of the surrounding background.
This position is closer to the instrument than when you sign in with facial
authentication.
The instrument will take three separate photos after you tap
Capture
. The
instrument will display a countdown before each individual photo is taken.
5.
Tap one of the following options.
•
Done
•
Re-take
Change the PIN for an instrument profile
This section describes changing a PIN for a local instrument profile. To change a PIN
for a Connect profile, see “Change the PIN for a Connect profile” on page 119.
1.
In the home screen, tap
(Profile)
.
2.
Tap
Edit
.
3.
Tap the
Old PIN
field, enter the current four-digit numerical PIN, then tap
Enter
.
4.
Tap the
PIN (4 digits required)
field, enter a new four-digit numerical PIN, then
tap
Enter
.
Tap the
Show PIN
checkbox to show or hide the PIN.
5.
Tap the
Confirm PIN
field, enter the new four-digit numerical PIN again, then tap
Enter
.
6.
Tap
Done
.
Chapter 8
Manage profiles
Manage individual instrument profiles
8
118
QuantStudio
™
6 Pro and 7 Pro Real-Time PCR Systems User Guide
