Using the WinPDM Software
Starting WinPDM
3-4
PDM3700 Instruction Manual
Thermo Fisher Scientific
Note
You also can display the PDM-New Connection screen by selecting
File >
Connect
from the drop-down menu, or by selecting the new
connection icon in the top, left-hand corner of the toolbar.
▲
5.
When in the “PDM-New Connection” screen, ensure that the
appropriate COM port displays in the white box, and select the “OK”
button. The “PDM - COM1” screen (
Figure 3–3
) will display.
Note
If the connection between the PDM3700 and the PC is successful,
the unit’s serial number will display in the top, right-hand corner of the
screen.
▲
Figure 3–3.
Connect screen
6.
If the connection is not successful or if there is no instrument attached,
a “Not Connected To PDM” message will display (
Figure 3–4
) and the
serial number will be blank or will display “N/A.” Ensure that the cable
connections are secure and installed correctly. Press the “A” (“WAKE
UP”) button on the PDM3700’s display to verify that the PDM3700 is
functioning properly and retry the connection.
7.
The “Last Service” date is displayed in the lower left corner. This date
will be updated by Thermo Fisher Scientific service personnel if the
unit is returned for service.
