Using the WinPDM Software
Starting WinPDM
Thermo Fisher Scientific
PDM3700 Instruction Manual
3-3
9.
The InstallShield Wizard screen with an “Installing WinPDM” message
will display, and then the WinPDM - InstallShield Wizard screen with
an “InstallShield Wizard Completed” message will display.
10.
When in the WinPDM - InstallShield Wizard screen with an
“InstallShield Wizard Completed” message, select the “Finish” button.
You do not need to restart your computer to use WinPDM. Double-click
on the WinPDM icon on the PC’s desktop to start the WinPDM
communications software program.
The PDM3700 must be connected to the charger and a PC to use the
WinPDM program. Refer to Chapter 2 for information on connecting the
PDM3700 unit to the charger and establishing communications.
1.
Connect the PDM3700 unit to its charger and the charger to your PC
(Chapter 2). Make sure both are on.
2.
Ensure that the charger and PDM3700 are connected (Chapter 2).
3.
Double-click on the WinPDM icon on the desktop to start the
program. You also can select the “Start” button on your personal
computer’s (PC’s) screen, and when the Start menu displays, select
Programs > Thermo >
WinPDM
.”
4.
The WinPDM Main screen will display. The splash screen in the
middle of the screen will disappear after a few seconds, and then the
“PDM-New Connection” screen will display (
Figure 3–2
).
Figure 3–2.
WinPDM Main screen with PDM3700 New Connection screen
Starting WinPDM
To start the WinPDM software
application:
New connection
icon
