Thermo Fisher Scientific
PDM3700 Instruction Manual
4-1
Chapter 4
Viewing and Saving Data
This chapter describes how to configure the data downloading process,
download data from the PDM3700, and how to view those data files using
the buttons in the PDM-COM1 screen (
Figure 4–1
).
When running a primary sample run, the PDM3700 unit will log data
points based on a pre-programmed logging template.
After you have performed a programmed sample run, you must use the
WinPDM software and the RS232 cable to download data from the
PDM3700 unit. Two data files are available for download; the first is a file
with a comma-separated value (.csv) file format. The second file is in .msha
format, which must be submitted to MSHA for validation. Both files can
be saved to the local computer system. Only the .msha file is submitted to
MSHA. The .csv data file can be viewed by using a spreadsheet program,
such as Microsoft Excel. Some runs may generate a status file list, which
can also be downloaded, saved, and viewed.
Note
If the computer does not have a built-in RS232 port, use the
supplied RS232 to USB adapter to connect the PC to the charger unit.
▲
Figure 4–1.
PDM-COM1 screen
