Safety Considerations
Thermo Fisher Scientific has contracted with one or more
recycling/disposal companies in each EU Member State, and this product
should be disposed of or recycled through them. Further information on
our company’s compliance with these Directives, the recyclers in your
country, and information on Thermo Scientific products which may assist
the detection of substances subject to the RoHS Directive are available at
www.thermo.com/WEEERoHS.
Hazardous materials
and infectious agents
Instruments, components, accessories and other associated materials may
not be returned to Thermo Fisher Scientific or other accessory
manufacturers if they are contaminated with radioactive or other hazardous
materials, infectious agents, or any other materials and/or conditions that
could pose a health or injury hazard to employees.
Contact Thermo Fisher Scientific Customer Support if you have questions
about decontamination requirements. If you live outside the U.S.A.,
contact your local Thermo Fisher Scientific office.
Fire safety
and burn hazards
To avoid a burn injury and the risk of fire or explosion, follow these
guidelines:
•
Avoid testing flammable or explosive samples.
•
If the instrument will be purged, use a clean, nonflammable purge gas.
•
Always engage the vortex or other cooler when the ambient
temperature at the installation site exceeds the safe operating
temperature for your model.
The following symbols warn you about hot surfaces in the immediate
vicinity.
8
Antaris EX Safety, Installation, and Site Preparation Guide
Thermo Fisher Scientific
