Thermal Dynamics Ultra-Cut 300 XT, Operating Instructions Manual

Page: 39 / 214

ULTRA-CUT 400 XT
Manual 0-5275 INSTALLATION 3-13
Avoid the following:
1. If you need to pull the cable through a power track do not fold the fiber back on itself making a sharp bend where it exits
the hose.
Art # A-09417
2. Don’t hook onto the fiber to pull on the cable.
Art # A-09418
3. Once the fiber cable is installed in the CCM or gas control make sure the strain relief nut is securely tightened onto the
hose so the hose can’t pull out of it like this:
Art # A-09677_AB
Hose not secured in
the Strain Relief