Thermal Dynamics Ultra-Cut 300 XT, Operating Instructions Manual

Page: 209 / 214

ULTRA-CUT 400 XT
Manual 0-5275 APPENDIX A-95
Installing Optional Single - Stage Air Filter
An optional filter kit is recommended for improved filtering with compressed air, to keep moisture and debris out
of the torch.
1. Attach the Single - Stage Filter Hose to the Inlet Port.
2. Attach the Filter Assembly to the filter hose.
3. Connect the air line to the Filter. The illustration shows typical fittings as an example.
NOTE!
For a secure seal, apply thread sealant to the fitting threads, according to the maker’s instructions.
Do Not use Teflon tape as a thread sealer, as small particles of the tape may break off and block the
small air passages in the torch. Connect as follows:
Art # A-12760
1/4 NPT to 1/4"
(6mm) Fitting
Regulator/Filter
Assembly
Inlet Port
Hose Clamp
Gas Supply
Hose
Single Stage Air Filter Attachment