TEXIO PS-A Series, Instruction Manual

Page: 99 / 116

11-3-19. Main relay setting (POWER)
This command sets the main relay and queries the main relay status.
Setting
POWER x1 x1: Sets the main relay operation.
ff.
y on.
0: Turns the main relay o
1: Turns the main rela
Application example POWER 1 Turns the main relay on.
Query POWER? Queries the on/off status of the main relay.
Response example POWER 1
.
f.
1: Indicates the main relay is on
0: Indicates the main relay is of
Remarks
-3-20. Unlocking (GTL) 11
This command cancels the panel keylock.
Setting GTL
No parameter.
Application example cal
c
GTL Enables panel operation for changing from remote control to lo
ontrol.
Remarks
11-3 al lock out se
le cking.
No
-21. Loc tting (LLO)
This command disab s panel unlo
Setting LLO
parameter.
Disables use of the ESC for remotely unlocking the operation
panel. Application example LO
Once local lock out is set, it cannot be cancelled until the power is
turned off.
L
Remarks
11-3-22. Sequence operation setting when the powe Q)
n es the sequence op s turned on.
EQ x1 ce operation when the
eration.
1: Specifies sequence operation.
r is turned on (PONSE
This command sets a d queri eration for when the power i
Setting PONS x1: Specifies whether to perform a sequen
power is turned on.
0: Specifies normal op
Application example PONSEQ 1 Specifies a sequence operation to start from the next time the
power is turned on.
Query PONSEQ? Queries the sequence operation setting for when the power is
turned on.
Response example PONSEQ 1 Indicates that a sequence operation has been selected.
Remarks
11-3 t setting wh
This command sets an preset recall operation for when the power is turned on.
Setting erform a recall operation when the
power is turned on.
hen the power was last turned off.
RESET 1.
-23. Prese en the power is turned on (PONPRE)
d queries the
PONPRE x1
x1: Specifies whether to p
0: Set values are for w
1: Recalls P
2: Recalls PRESET 2.
3: Recalls PRESET 3.
Application example E 1 PONPR Recalls PRESET 1 when the power is turned on.
Query PONPRE? Queries the preset recall setting for when the power is turned on.
Response example PONPRE 1 SET 1 is recalled when the power is turned on. Indicates PRE
Remarks
89 89