9-2-5. Turning the output on/off through external contacts
If the analog IF board is installed in the PS-A power supply unit, you can turn the output on/off operation through
external contacts.
To turn the output of the unit on, both the OUTPUT key and external contacts must be used.
Operation procedure
Turn off the unit power switch, and turn the output
off through the external contacts.
For details about turning the output on/off
through external contacts, see
analog signal to the standard board”
and
Wiring an analog signal to IF-70PS”.
1. Turn on the power switch while pressing and
holding the MENU key.
Release the MENU key when the panel is lit.
The MENU key is then lit in green, and the
ESC/KEY LOCK key and ENTER/MEM key start
blinking green.
The function name is displayed in the voltage
indicator, and the function setting is displayed
(blinking) in the current indicator.
2. The output setting for when the power is turned
on must be set to "on" by using the MENU key
and rotary encoder.
("Pout" is displayed in the voltage indicator, and
"on" in the current indicator)
◆
For details, see
“6-4-2. Setting the output when
71
71
