11-3-50. Local bus setting (ADRS)
The command sets the system address of controlled units when they are connected via the local bus.
1
l bus.
Setting
ADRS x
Specifies a device in loca
Application example
Controls the unit whose system address is "3".
ADRS 3
Query
DRS?
A
Queries the system address of the controlled unit.
Response example
ADRS 5
Indica
e unit controlled by the
tes "5" is the system address of th
local bus.
Remarks
If the assigned system add
te independently of the local
address (broadcast operati
ts a response is used at this
time, normal operation of
in this
situation.
The system address of the
ress is "0", all the devices will opera
on). If a query command that reques
the bus will be impeded. Avoid using a query command
unit connected to the PC should be “1”.
97
97
