6-5. Clearing the Memory
There are 3 different ways to clear the data memory:
(1) Clearing all the setting data stored in the unit, returning the settings to their factory defaults (factory reset).
(2) Clearing the setting data for manual operation.
(3) Clearing the setting data for sequence operation.
(1) Clearing all the setting data stored in the unit
Operation procedure
1. Turn on the power switch while pressing and
holding the ENTER/MEM key.
Release the ENTER/MEM key when the panel is
lit.
The ESC/KEY LOCK key and the ENTER/MEM
key then start blinking green.
The type of memory to be cleared is displayed.
2. Press the ENTER/MEM key.
Pressing the ENTER/MEM key clears the
memory.
Pressing the ESC/KEY LOCK key cancels the
memory clear.
The message shown in the figure on the left is
displayed. The unit is then restarted
automatically.
40
40
