11
11-
Setting
VOLT x1
Sets the output voltage.
-3. Commands
3-1.
Voltage setting
(VOLT)
This command sets or queries the output voltage.
Application example
e to 5.00V.
VOLT 5.00
Sets the output voltag
Query VOLT?
Queries
the
ou
age set
tput volt
ting.
Response example
VOLT 5.00
tes the set output voltage is 5.00V.
Indica
Remarks
"x1" is a de
nteger
. Dig
th
solution are rounded off.
ails
ange Tables”
.
a
ue will be given.
cimal or i
number
its less than e setting re
◆
For det
If the set v
about the setting range, see
“11-6. Setting R
lue exceeds the range, the maximum val
11-3-2. Current setting ( MP)
This command sets or queries the output current.
A
Setting
AMP x1
Sets the output current.
Application example AMP 5.00
Sets current to 5.00A.
Query AMP?
Queries
the
output current setting.
Response example
AMP 5.00
Indicates the set output current is 5.00A.
Remarks
"x1" is a decimal or integer number. Digits less than the setting resolution are rounded off.
◆
For details about the setting range, see
“11-6. Setting Range Tables”
.
If the set value exceeds the range, the maximum value will be given.
11-3-3. OVP setting (OVP)
This command sets or queries the OVP (over-voltage protection) value.
Setting
OVP x1
Sets the OVP.
Application example OVP 5.00
Sets the OVP value to 5.00V.
Query
OVP?
Queries the OVP value.
Response example
OVP 5.00
Indicates the set OVP value is 5.00V.
Remarks
"x1" is a decimal or integer number. Digits less than the setting resolution are rounded off.
◆
For details about the setting range, see
“11-6. Setting Range Tables”
.
If the set value exceeds the range, the maximum value will be given.
11-3-4. UVP setting (UVP)
This command sets or queries the UVP (under-voltage protection) value.
Setting
UVP x1
Sets the UVP value.
Application example UVP 5.00
Sets the UVP value to 5.00V.
Query
UVP?
Queries the UVP value.
Response example
UVP 5.00
Indicates the set UVP value is 5.00V.
Remarks
"x1" is a decimal or integer number. Digits less than the setting resolution are rounded off.
◆
For details about the setting range, see
“11-6. Setting Range Tables”
.
If the set value exceeds the range, the maximum value will be given.
11-3-5. OCP setting (OCP)
This command sets or queries the OCP (over-current protection) value.
Setting
OCP x1
Sets the OCP value.
Application example OCP 5.00
Sets the OCP value to 5.00A.
Query
OCP?
Queries the OCP value
Response example
OCP 5.00
Indicates the set OCP value is 5.00A.
Remarks
"x1" is a decimal or integer number. Digits less than the setting resolution are rounded off.
◆
For details about the setting range, see
“11-6. Setting Range Tables”
.
If the set value exceeds the range, the maximum value will be given.
85
85
