Operation procedure
4. Press the green-blinking ENTER/MEM KEY to
enter the setting.
After the setting is entered, the current indicator
stops blinking, remains lit for a short while, and
then starts blinking again.
5. Press the green-blinking ESC/KEY LOCK key to
exit. The message shown in the figure on the
left appears. Normal operation of the unit is
then available.
Turn the power switch off and then back on to
display the voltage and current that were
entered.
A
V
W
W
CC:R
CV:G
OUTPUT
V(W)
A(W)
MENU
PROTECT
CHECK
ESC/KEY LOCK ENTER/MEM
1
2
3
DIGIT
PRESET/SEQUENCE
* LOCK/RMT
STEP
STOP
PAUSE
START
4
5
A
V
W
W
If CC priority mode is off, the CV/CC LED
remains unlit while the output is off.
If CC priority mode is on, the CV/CC LED blinks
red while the output is off.
37
37
