6-4-4. Setting the display while the output is off
The voltage and current indicators can display either the set values or output values while the output is off.
Operation procedure
1. Turn on the power switch while pressing and
holding the MENU key.
Release the MENU key when the panel is lit.
The MENU key is then lit in green, and the
ESC/KEY LOCK key and the ENTER/MEM key
start blinking green.
The function name is displayed in the voltage
indicator, and the function setting is displayed
(blinking) in the current indicator.
2. Repeatedly press the MENU key until "dSPy" is
displayed in the voltage indicator.
Turning the rotary encoder displays the following
in the current indicator. Select the desired setting.
Displays set values.
3.
Displays output values.
4. Press the green-blinking ENTER/MEM KEY to
enter the setting.
After the setting is entered, the current indicator
stops blinking, remains lit for a short while, and
then starts blinking again.
5. Press the green-blinking ESC/KEY LOCK key to
exit. The message shown in the figure on the
left appears. Normal operation of the unit is
then available.
Turn the power switch off and then back on
again to display the selected values
When the output HI-R function is on, the setting of this function is invalid.
The voltage indicator displays the output voltage, and the current indicator displays "Hi-r" (blinking) when the output is off.
39
39
