8-6-4. Stopping sequence programs
Operation procedure
1. To stop the sequence program, press the STOP
key while the START key is lit in amber (while
the sequence program is being executed
automatically) or while the PAUSE key is
blinking amber (while the execution time of the
sequence program step is paused).
When the sequence program is stopped, the
voltage and current indicator display the step No.
that was being executed.
Both the STOP key and OUTPUT key can be
used to stop the sequence program.
When a sequence program is stopped, the output will be turned off, even if the output is set to be on for the stopped
step.
If a sequence program is stopped, it cannot be restarted from the stopped step.
59
59
