Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Radiation Exposure Statement
The products comply with the FCC/IC RF Exposure for Low Power Consumer Wireless Power
Transfer. RF exposure limits are set forth for an uncontrolled environment and are safe for
intended operation as described in this manual. The farthest RF exposure demonstrated by
compliance was at 20cm and farther from the user's body; set the device to low output power if
such function is available.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour
unenvironnement non contrôlé.
Déclaration d'exposition aux radiations
Le produit est conforme à l'exposition RF IC pour le transfert de puissance sans fil de
consommateurs de faible puissance. La limite d'exposition RF fixée pour un environnement non
contrôlé est sans danger pour le fonctionnement prévu tel que décrit dans ce manuel.
L'exposition RF supplémentaire que la conformité a été démontrée à 20cm et plus de
séparation du corps de l'utilisateur ou de mettre l'appareil à la puissance de sortie inférieure si
une telle fonction est disponible.
Radio Frequency Information
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician to help.
CAUTION:
This equipment and its antennas must not be co-located or operated with
another antenna or transmitter.
Canada
CAN ICES-3 (B)/NMB-3(B)
Radio Regulatory Compliance
258
MODEL X Owner's Manual
