Model X has learned the remote control and
you can touch
Continue
on the touchscreen.
If the headlights do not flash:
• Check the batteries in the remote control.
It is a good idea to replace the batteries
before you start programming.
• Ensure you are standing in front of
Model X with the device's remote control
positioned within two inches (five cm) of
the Tesla emblem.
• Press and hold the button on your
device's remote control until the
headlights flash. In some cases you must
hold the button on the remote control for
up to three minutes.
NOTE:
Some HomeLink remote controls
require multiple short presses
(approximately one second each press)
instead of one long duration press. If you
are unsuccessful after multiple attempts
of using long presses, try repeated
presses of one second each.
D-Mode and UR-Mode
In D Mode and UR-Mode, the device’s receiver
learns Model X. The touchscreen instructs you
to press the "Learn" button (may also be
called "Program" or "Smart") on the device's
receiver. If this does not work, refer to the
following guidelines:
• Park Model X with its bumper as close as
possible to the garage door, gate, etc.
that you are trying to program.
• Make sure you are pressing the receiver's
Learn/Program/Smart button. For
instructions on how to put the receiver
into learning mode, refer to the product
details provided with your RF device that
you are trying to program.
• If you see a screen called "Train the
receiver" while programming the device,
remember that this is a time-sensitive
step. After pressing the Learn/Program/
Smart button on the device's remote
control or receiver, you only have
approximately 30 seconds to return to
your vehicle, press
Continue
, then press
the trained HomeLink device name twice.
Consider having someone assist you with
this step.
• Most devices stay in learning mode for
only three to five minutes. Immediately
after pressing the device's Learn/
Program/Smart button, follow the
instructions displayed on the vehicle's
touchscreen.
For additional assistance or compatibility
questions, contact HomeLink
).
HomeLink Universal Transceiver
193
Using the Touchscreen
