Tescom MTP200B, Operating Manual, Page: 79 / 172

MTP200B BT LE Signal Generator Set-up
63
11.2.3 Power Level Setting
Enter the level of power to be received by DUT (Output power of tester).
●
Select GEN (M1) → SG → Select POWER (Input value between -5 ~ -70 dBm)
11.2.4 Path Loss Setting
Input PATH LOSS value. PATH_LOSS is the value of loss from MTP200B’s output port to DUT’s input p
ort. If a user input PATH_LOSS value, MTP200B displays output power value compensating PATH_LOS
S value.
●
Select GEN (M1) → SG → PATH_LOSS
If a user input PATH_LOSS value, MTP200B displays POWER value as [Ptx - PATH_LOSS value].
11.2.5 Bit Pattern Setting
Set BIT PATTERN of BT_LE to be transmitted from MTP200B. PRBS9 is normally used, but ALL_ZEROS,
ALL_ONES, 10101010, 11110000 can be used depending on the test item.
●
Select GEN (M1) → SG → BIT_PATTERN