Tescom MTP200B, Operating Manual

Page: 123 / 172

BT_LE Signal Analyzer Command List
107
17.2.4 List of Command of Measurements
There are two ways to read the measurements.
1. To read the measurements all at once.
- READ:ANL:MEAS:ALL:AVG?
* Measurements used to decide the specs of each test item (when BTLE_TEST)
- Outpout Power : Power_avg, Ppk_Pavg_avg
- Modulation and Carrier Frequency Offset and Drift : FTx-Fn_avg, F[0]-F[n]_avg, F[1]-F[0]_av
g, F[n]-F[n-5]_avg
* Measurements used to decide the specs of each test (when BTLE_ADV)
- Outpout Power : Power_avg, Ppk_Pavg_avg
- Modulation and Frequency Offset : dF0_avg, dF2_avg
2. To read the measurements what user wants by individual command.
- READ:ANL:MEAS:POWER:AVG?~READ:ANL:MEAS:DF2MAX_RATE? (9 commands)
1. READ:ANL:MEAS:ALL:AVG?
○
Description: Confirm AVG value among all measurements (Available under both TEST_MODE an
d ADVERTISING)
○
Response
■
TEST_MODE: Outputted in order of Power_avg, Ppk-Pavg_avg, dF1_avg, dF2_avg, FTx-Fn_a
vg, F[0]-F[n]_avg, F[1]-F[0]_avg, F[n]-F[n-5]_avg, data_pattern, current_channel, meas_cou
nt, and dF2_rate: each value is divided by comma, ‘N’ is displayed if there is no measurments
■
ADVERTISING: Outputted in order of Power_avg, Ppk-Pavg_avg, dF0_avg, dF2_avg, current_
channel, and meas_count; each value is divided by comma, ‘N’ is displayed if there is no meas
urments
■
“ERR” response will be returned in case there is no measurement
2. READ:ANL:MEAS:POWER:AVG?
○
Description: Checks the average Power measurements (Available under both TEST_MODE and A
DVERTISING)
○
Response: -50.0 ~ +20.0, ERR
3. READ:ANL:MEAS:POWER_PK_AVG:AVG?
○
DescriptionChecks the average Power measurements (Available under both TEST_MODE and AD
VERTISING)
○
Response: Measurements or ERR