Tescom MTP200B, Operating Manual, Page: 73 / 172

MTP200B BT LE Signal Analyzer Set-up
57
10.2.6 Path Loss Setting
Enter the path loss of each channel. To apply the same path loss to all channels, enter the path loss in
CH_ALL. Path loss refers to the signal loss occurring between the output end of MTP200B and input p
ort of DUT. MTP200B compensates the path loss and reflects the loss on the measurement result.
There are two ways to set Path Loss as follows.
1. Input same Path loss value to all channels
○
ANL (M2) → select LOSS tab → Input Path Loss value after selecting CH_ALL
2. Input different Path Loss value to each channel
○
ANL (M2) → select LOSS tab → Input Path Loss value after selecting a channel