Tescom MTP200B, Operating Manual, Page: 66 / 172

50
BT LE Signal Analyzer(ANL) Mode
9.1 BT LE Signal Analyzer(ANL) Mode
The command of BT LE Signal Analyzer can be used for the purpose as follows.
●
Measures and analyzes general BT LE signal
○
Measures and analyzes RF characteristics of BT_LE TX transmitted from DUT
●
BT LE RF PHY("RF-PHY.TX.4.2.0") Examination items test(3 items)
○
Output Power
○
Modulation Characteristics
○
Carrier Frequency Offset and Drift
●
Examination items test thorough Advertising Mode for complete product(2 items)
○
Output Power
○
Modulation and Frequency Offset
9.2 BT LE Signal Generator(GEN) Mode
The command of BT LE Signal Generator can be used for the purpose as follows.
●
Generates general BT LE signal.
●
BT LE RF PHY(RF-PHY.TS.4.2.0) Receiver Sensitivity of examination item test.
9.3 BT LE RF Test Cases
MTP200B provides RF Test Cases defined in BTLE test standard.
BLE Test Cases Supported by MTP200B
Output power(TP/TP/TRM-LE/CA/BV-01-C)
Modulation characteristics(TP/TRM-LE/BV-05-C)
Carrier frequency offset and drift(TP/TRM-LE/BV-06-C)
Receiver sensitivity (TP/RCV-LE/CA/BV-01-C)
Maximum input signal level (TP/RCV-LE/CA/BV-06-C)
Output Power + Modulation character Initial carrier frequency tolerance ( at Advertising mode )