Tescom MTP200B, Operating Manual

Page: 72 / 172

56
MTP200B BT LE Signal Analyzer Set-up
Figure 10-4 TEST_CASE Setting Screen
Table 10-2 BT_LE TEST_CASE
TEST_CASE Description of TEST_CASE TEST_METHOD
POW Output power TEST_MODE
POW+MOD Output power + Modulation characteristics TEST_MODE
POW+Fc_O/D Output power + Carrier frequency offset and drift TEST_MODE
POW+MOD+Fc Output power + Modulation characte Carrier frequency offset TEST_MODE /
ADVERTISING
In case the user selects ADVERTISING as TEST_METHOD, the test item selection window will be
disabled in TEST_CASE, and POW+MOD+Fc will be automatically selected.
10.2.5 Number of Packet Setting
Set the number of packets to be measured for each measurement. The higher the number is, the long
er the measurement time. Enter the minimum value required for reliable measurement.
●
Select ANL (M2) → CONFIG → NUM_PACKET → Set the number of packets