Tescom MTP200B, Operating Manual

Page: 55 / 172

8. WLAN Signal Generator
General Configuration for WLAN RX Measurement
39
MTP200B sends user-defined WLAN test packets to DUT while DUT checks the number of received packets to measur
e the sensitivity and the Packet Error Rate (PER).
8.1 General Configuration for WLAN RX Measurement
Figure 8-1 Configuration for WLAN RX Measurement Using a Shield Box
1. DUT Preparation: Most WLAN terminals have an internal test mode for performance checking. To
set the test mode, users use the PC control program or perform the required terminal operations d
epending on DUT. In test mode, DUT receives the signals transmitted by the measurement device
and analyzes the number of received packets and errors.
2. Shield Box: For the reliable measurement and prevention of electromagnetic interferences, use a s
hield box. Connect the RF cable to the shield box or create a radiation environment using the ante
nna coupler depending on the DUT type.
3. MTP200B: MTP200B generates user-defined WLAN packets and transmits them through the RF po
rt. Production lines requiring fast measurement tend to use the remote program to control DUT an
d MTP200B.