Terumo BCT T-RAC II, Instructions For Use Manual

Page: 100 / 146

Page 30 of 76
3. Events – volume chooser
In this phase information about the donation can be entered via ‘events’ displayed on
the screen. By default, only a volume chooser is depicted here. This screen can also
show other ‘events’ besides the volume chooser (see chapter 6.2.4).
Depending on the program setting ‘choose vol.’ (see chapter 7.2.1), the volume
chooser looks different:
Volume chooser
Depending on the settings,
this field looks different:
● Presets
The volumes are shown as
presets (like shown in the
picture). Simply press a
preset to select the
donation volume. Up to 4
presets can be configured.
● Keyboard
Press the digits to set the
volume.
Press this button to
confirm the volume.
Press this button to
remove unwanted input.
● Barcode only
No manual input possible,
the volume is determined
by the scanned barcode.
Keyboard button
Depending on the settings, this screen features a
keyboard button. When pressed, the keyboard
volume chooser is shown.
[NOTE] In the settings it is also possible to set a fixed volume. In that case, the volume
chooser won’t be shown.
[NOTE] It is impossible to select a higher volume than the maximum donation volume
configured in the settings.