Terumo BCT T-RAC II, Instructions For Use Manual

Page: 74 / 146

Page 4 of 76
1 Introduction
Intended use
T-RAC II is a blood collection weighing and mixing device with advanced safety and usability
features. T-RAC II controls, by continuously measuring the weight, the collection of blood
during donation. T-RAC II functions with different types and brands of blood bags. It mixes
the collected blood to prevent clotting. The device is intended to be operated by nurses
experienced in blood collection, however only under supervision of a doctor present during
donation. The device can be transported for usage at different places.
T-RAC II shall be used in a quiet, clean and well-lit room, which is free from heavily vibrating
devices, strongly electromagnetic radiating devices and noisy devices.
T-RAC II Ethernet and Wifi can be connected to the following external devices: a central
computer system, a barcode reader, a remote control and a USB flash drive. This enables
verification of barcodes, remote programming of T-RAC II parameters and collection of
donation data.
Throughout this manual, information that only applies to T-RAC II Ethernet and Wifi will be
printed in
italics . This information doesn’t apply to T -RAC II Jr.
2 Symbols and definitions
2.1 Symbols
Catalogue number
This way up
Serial number
Fragile, handle with care
Batch code
Keep dry
Class II equipment
Temperature limit
Humidity limitation.
Non-ionizing radiation
Consult instructions for use
On/off button (stand-by)
Manufacturer
Ethernet connector (at the back)
Direct current
USB connector for the barcode
reader (at the back)
Authorized representative in
the European Community
USB connector for the USB flash
drive
Ethernet port for wifi
Connector for the Desktop
Remote Control (at the back)