Page
26
of
76
6
Installation and operation instructions
6.1
Installation
–
first time use
Unpack the device and place it at the desired position in the donation area. T-RAC II is to
be placed beside a blood donation bed in which the donor will lie. The front of the device is
to be placed towards the operator.
At first time use, remove the blue protection foil from
the battery and insert the battery in the device (chapter 5.1).
Connect the device to the
power supply and the power supply to the mains. Press the on/off button to switch on the
device. Keep the device connected to the mains until the battery pictogram shows that the
battery is fully charged.
When the battery is charged, the device is ready for use. It can be configured to your needs
(chapter 7 ) and used for blood donation (chapter 6.2.3). For more information about the
parts of the device and its additional accessories, see chapter 5 .
Connectors for the multi-functional pole.
USB connector for the
USB flash drive
Connectors at the back:
USB connector for the
barcode
reader
(chapter 5.6)
RJ-45 connector for
Ethernet
communication
(chapter5.10)
RJ-45 connector for wifi
communication
(chapter 13 , only on
T-RAC II Wifi)
Connector
for
the
Desktop
Remote
Control (chapter 5.7.2)
Power connector, to be
connected to the power
supply.
Summary of Contents for T-RAC II
