Terumo BCT T-RAC II, Instructions For Use Manual

Page: 118 / 146

Page 48 of 76
[WARNING] The USB flash drive may only be inserted or removed from T-RAC II when T-
RAC II is switched off. Otherwise, donation data may get lost and the USB drive may get
damaged.
[WARNING] Never switch off T-RAC II while data is being transferred. When data is being
transferred, this is visualized on the touch screen by a green blinking USB-symbol.
[NOTE] It is not possible to copy a single program. All ten programs will be exported /
imported at once. Existing programs will be overwritten!
Contents of programs
The contents of the programs are explained in the following chapters. They can be reached
b
y selecting a program and pressing ‘edit’. A new screen will be displayed:
Name of the program which is
being edited.
Navigation through the different
pages of the program.
• Page 1 to 4: program
settings (chapter 7.2.1).
• Page 5: program flow
(chapter 7.2.2).
• Page 6: barcode rules
(chapter 7.2.3).
The cancel and save button
apply only to the program which
is being edited. One of both
buttons needs to be pressed in
order to go back to the previous
screen.
7.2.1 Program settings
Following program settings can be found on screen 1:
Name of program
20 characters
This name will be shown in the program overview
and in the event ‘Program #’.
Updated on
Information
Moment this program was edited last time.
Alarm volume
1 / 2 / 3 / 4 Default: 2
Audible volume of the alarms.