Tennant M17 Series, Service Information Manual

Page: 88 / 236

3 -58
SUPERVISOR CONTROLS
10. To enable the login number at start up, press
the Enable Login button.
The Enable Login button will change
from Enable Login to Disable Login. See
DISABLING LOGIN for instructions how to
disable login.
11. Now at machine start up, a login screen will
display. The new user will need to enter their
assigned login number to operate machine.
12. When the user is done operating the machine,
it is recommended the user log out by pressing
the help button, and then pressing the logout
button. Turning the key to the off position is
another way to also logout.
13. Use the Edit Prof i le button, Copy Prof i le button,
and Delete Prof i le button to manage the
current user prof i les.
ENABLING THE LOGIN
1. Turn on the machine, log into the supervisor
screen, and press the settings button to
access the supervisor settings screen. See
ENTERING THE SUPERVISOR MODE .
2. Press the Enable Login button.
3. Press the yes button to enter the Default User
screen.
4. Press either the Operator button or Supervisor
button to select the desired default user.
M17 Service Information 90 17358 (0 8 -2016)