manualshive.com logo in svg

Tennant M17 Series, Service Information Manual

Share
Download
Tennant M17 Series Service Information Manual Download Page 43

3-1

3

M17 Service Information 90

17358 

(0

8

-2016)

 MAINTENANCE 

11. After the batteries have completely charged,

disconnect the charger connector from the

battery cable connector.

12. Reconnect the battery connector to the

machine connector.

FOR SAFETY: When servicing machine do 

not disconnect the off-board charger’s DC 

cord from the machine receptacle when the 

charger is operating. Arcing may result. If the 

charger must be interrupted during charging, 

disconnect the AC power supply cord f

i

rst.

13.

 

Close the battery compartment top cover.

   BATTERY CHARGER USB PORT

The battery charger USB port is for maintenance 

computer access to the charger by authorized 

service personnel only. 

Do Not

 plug cell phones 

or other unauthorized electronic devices into the 

battery charger USB port. 

Do Not

 plug anything 

into the USB port while the battery is charging.

Summary of Contents for M17 Series













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands