Tennant M17 Series, Service Information Manual

Page: 57 / 236

3-2 7
M17 Service Information 90 17358 (0 8 -2016)
MAINTENANCE
TO ADJUST SWEEPING SIDE BRUSH -
STANDARD PANEL
1. Turn on the machine.
2. Press and hold the sweeping side brush button
until the side brush height adjustment screen
appears in the LCD display.
NOTE: The Contrast Control and Conf guration
Mode buttons are used for selecting and adjusting
the side brush height.
3. Press the desired sweeping side brush button
to select it. The selected side brush will lower
and spin.
4. Observe the brush pattern
5. Press the left (-) button to raise the brush
or the right (+) button to lower it to obtain
the correct brush pattern. The indicator bars
increase as the brush gets lower.
6. Press the sweeping side brush button to
save the setting and return to the side brush
adjustment text prompt.
7. Repeat previous instructions to adjust the
other sweeping side brush.
8. Recheck the brush patterns. Adjust brush
height as necessary.
NOTE: Contact a Tennant service representative if
there is a f at pattern (full circle) after the sweeping
side brushes have been adjusted.