Voice Gateway 4FXS User Manual
- 66 -
Busy Tone Duration (1 ~ 254), [60]:
Howler Tone Duration (1 ~ 254), [60]:
Digit Max Interval (10 ~ 60), [25]:
Ringback Tone Duration (1 ~ 254), [60]:
Ring Max Time (1 ~ 254), [60]:
Call Waiting Time (1 ~ 30), [30]:
Confirm Tone Duration (1 ~ 254), [0]:
Therein, the numbers in “[ ]” means the value set for the parameter currently, unit
is second.
H.248 timer setting command
codec_ep1> dm_timer {parameter1} {parameter2} {parameter3}
Therein, parameter1 is the short timer, parameter 2 is the long timer, parameter 3 is
the start timer, and unit is second.
Setting command of RTP flow keeping of H.248
codec_ep1> keepRTP
The command is set by mode of interaction, it does not need any parameter. After
performing the command, CLI will show RTP flow keeping on-off state, and then
inquire the user whether to turn it on or turn it off. For example:
RTP keeping is enabled.
Enable RTP keeping? [y/n]:
At this time users only can enter bite “y” or “n”, and have no need of noting
capital and small letters. “y” means to turn on, and “n” means to turn off.
Users can close, or directly press enter key to automatically get out of the setting, or
press “Ctrl ＋C” to cancel the setting.
codec_ep1> show {parameter}
