Voice Gateway 4FXS User Manual
- 58 -
take-effect: command to take make parameters effect.
Among the above said commands, 1～5 belong to the directory commands, namely,
they have sub-commands.
Sub-command
It refers to the command set after entering a particular setting directory, see below:
Command Layer
Sub-command
Codec-layer
sub-command
audio_port，cid，cn，dtmf，df_codec，ec，fax，fax_ctrl_mode，
g.723.1，gain，jb，line_hook，oa，pktintvl，priority，rfc2833_pt，
rfc2833_neg_mode，rfc2833_red_pt，ring，ring_pattern，sc，
t38_ev_det_mode，t38_mode ，t38_port，tone，tone_duration，
dm_timer，keepRTP，vbd，show，exit，help
Network-layer
sub-command
dns，gateway，hostname，ip-mask，mode，ntp，vlan，pppoe，
show，exit，help
Protocol-layer
sub-command
al_par_en ， cmddelay ， digitmap ， empty_no_with_blank ，
ep_name，ephterm，heartbeat，howler_logout，local_ctrl_resp，
local_tone_ctrl，md5，mg，mgc，mgc2，mgc3，mgcmode，port_vis，
pos_num，reg_reason_code，remote_dscr_resp，rereg，
resend_time ， send_local_sdp ， sig_ab_mode ， trans_type ，
wt_to_handle，show，exit，help
System-layer
sub-command
debug，dmesg，download，ifshow，load，logoutep，logoutmg，
mem，regmg，resourceinquiry，ping，protocol，ps，regep，
reboot_type，route，save，test，timezone upload，version，
exit，help
Manage/snmp-layer
sub-command
agent, community, exit, group, help, show, switch, trap, user
Every command format is organized in the form of “command name, parameter 1,
parameter 2.....”. For instance, network> ip-mask 192.168.1.2/24
Therein, “network>” is the command prompt, “ip-mask” is the command name,
and “192.168.1.2/24” is a parameter.
Part of commands have no need of parameters, and can be operated by way of
interaction.
6.1.4 Auxiliary Function
