Voice Gateway 4FXS User Manual
- 60 -
command line logged in by Telnet. These commands also are the ones that were
preset via procedure code.
6.2 Detailed Explanations for Voice Command Usage
6.2.1 Compressed Chip Setting Command Set
You could go to compressed chip setting contents once entering “codec” command,
see below: ＃codec
Please input endpoint index (1 ~ 24): 1
In consideration of many ONU ports, so the subport displays port’s parameters. The
host of parameters are the global parameters, and the parameters showing in every
port mode is the same as the set ones. Including
Endpoint1 audio port: 4000
Endpoint1 T.38 port: 14000
The above two are different from the parameters shown in each port, and they can be
set respectively.
CID mode setting command
codec_ep1> cid { parameter }
This command is used to set the caller ID display mode, parameter is “dtmf”or
“fsk”.
