Voice Gateway 4FXS User Manual
- 85 -
This command is to set the proxy port. Its defaulted number is “162”. Parameter is
the number of the proxy port planned to be set.
Example：#manage/snmp> proxy port 161
Command to enable or disable trap
#manage/snmp> trap switch { parameter }
This command is adopted to turn on or turn off trap function of snmp. Parameter
only can be “on” or “off”. “on” means to turn on trap function; and “off”
means to turn it off.
Example：#manage/snmp> trap switch on
Command for setting trap-related parameters
#manage/snmp> trap set { parameter1 } { parameter2 }
The command is used to set trap’s port number and host IP. Parameter 1 is host IP,
namely the address that trap information is sent to; parameter 2 is trap’s port
number, the default is 162. (All communities here use the same trap configuration).
Example：#manage/snmp> trap set 192.168.3.17 162
Command for displaying SNMP configured information
#manage/snmp> show all
Once the command is carried out, all of snmp configured information will be shown.
