Voice Gateway 4FXS User Manual
- 67 -
The parameter can be “all” or the command name of each compressed chip setting,
for instance:
codec_ep1> show dtmf
When the parameter is “all”, it will show all parameter values in directory of this
layer; when the parameter is the designated command name, it will show the
parameter value. Therein, when the parameter configuration value is different from
the value which is being used, CLI will show the value which are being used together,
and with “*” before them. For instance:
codec_ep1> show fax
( "*" means the Running Config Value)
FAX mode: T.38 * Transparent
Exit command
Interactive exit mode
codec_ep1> exit
If there is no any parameter set, please directly go back to the root command layer.
If there is one or more parameter sets, after buttoning “exit”, the command line will
inquire the users whether to save the setting or take effect immediately, see below:
Changes found, please select the operations:
[1] Discard changes.
[2] Save changes without taking effect.
[3] Save changes with taking effect instantly.
Your choice? (Press Ctrl-C or Enter to cancel exiting):
Therein, “[1]” means to give up setting, “[2]” stands for only to save the changed
parameters instead of taking effect immediately, and “[3]” refers to saving the
changed parameters and take effect immediately. After making a choice, CLI will go
back to the root command layer. Users can button “Ctrl-C” or enter key to cancel
