Voice Gateway 4FXS User Manual
- 82 -
Exit command
system.> exit [parameter]
Help command
system.> help [parameter]
6.2.5 CLI Cancellation Command
#logout
The command has no need of any parameter, and it is used to cancel CLI.
6.2.6 System Restart Command
# reboot
The command has no need of any parameter, and it is used to restart the target
board.
6.2.7 Parameter Display Command
＃show {parameter}
The parameter can only be “codec”, protocol”, net”, private” or “epstatus”. Of
them, “codec” refers to the compressed chip; “protocol” refers to the protocol;
“net” refers to network; and “private” means the private protocol. If the
configured parameter value differs from the value being used, CLI will display all
values which are being used together, and with “*” before them. When the
parameter is “net” or “private”, CLI will also show the state of current module,
for example:
