Voice Gateway 4FXS User Manual
- 25 -
3.10 Telnet Login
Through Telnet to log the device in the configuration interface. (after the device is
energized, LAN port’s default IP is 192.169.0.1 and subnet mask is 255.255.255.0).
Carry out inband management to the device via command line configuration.
This device can Telnet to the configuration interface by LAN port and WAN port
Telnet. But WAN port’s IP address perhaps is dynamically acquired via DHCP and
PPPoE. So it may not be convenient for TELNET to visit. Therefore, it is suggested that
users go to the configuration interface from LAN port TELNET. Entering TELNET needs
to:
1.
find a crossover cable or through line;
2.
Use a cable to link PC machine’s network card and LAN port together. If
LAN port’s LINK light flashes, it means PC machine has been connected with
the Device;
3.
Modify/add IP address of PC machine’s network card to be 192.169.0.x (X is
an integer more than 2 and less than 254), and mask to be 255.255.255.0;
4.
Open a command window on PC machine, and then
[click WINDOWS’s <start> menu － >click <operation> to open the
operation window, then enter cmd or command in <opening> drop-down box, finally,
click to determine.]
5.
execute the following command in command line’s window, refer to telnet
192.169.0.1 1250 in the following image:
6.
click enter key to go to the device’s telnet login interface, see beow:
