Telpo 4FXS User Manual Download Page 26

Page: 26 / 85

Voice Gateway 4FXS User Manual

- 26 -

Input correct username and password, the default username is admin, and

default password is psw.iad.

Click enter key to enter configuration interface.

3.11 Super Terminal Login

Voice gateway can configure the device by CONSOLE port. Connect one end of serial

port line to the device’s CONSOLE control port, and another end to any serial port

of the computer. Then follow the sequences of start menu－>procedures－>appendix

－>communication－>super terminal to start up super terminal. If no any super

terminal is installed, please install it from control panel. For specific matters, please

refer to Windows.

1. After the super terminal is turned on, a “link description” will appear, requiring to

enter a name and choose icon for this link, shown as follows.

Summary of Contents for 4FXS






















































































Search results

Summary of Contents for 4FXS

Reviews:

Related manuals for 4FXS

Brands by name

Popular brands

Telpo 4FXS, User Manual

Search results

Summary of Contents for 4FXS

Reviews:

Related manuals for 4FXS

Brands by name

Popular brands