Voice Gateway 4FXS User Manual
- 80 -
19589 pts/2 00:00:00 cli
19967 pts/2 00:00:00 ps
Manual-registration endpoint command
system> regep
This command is adopted to manually open the endpoint of the forbidden NGN
business, and then the endpoint will be used to register at MGC once more. The
usage of the command is similar with 2.4.4.
Routing table display command
system> route
This parameter has no need of any parameter. It is transplanted into the route
command of busybox to display current route setting state of the system, but it has
no configuration function.
Command to save and load parameters
Parameter saving command
system> save or
system> save as {parameter}
The parameter only can be “pf0”, pf1”or “pf2”. “save as pf0” means there is no
any parameter for this command. The command is used to save the configured values
of the all current parameters into the different parts of Flash. For example:
system> save as pf1
Parameters loading command
system> load {parameter}
The parameter only can be “pf1”, pf2”, df1” or “df2”. “pf1” and pf2” means
two places of the memory, with two sets of default configured values saved, which are
not allowed to be changed by users. The command is used to load the configured
