WE310F5-X IP2WiFi Legacy AT Command Reference Guide
80664ST11079A Rev. 3
Page 9 of 79
2021-10-25
Not Subject to NDA
2.
OVERVIEW
AT Commands
The Telit wireless module family can be controlled via the serial interface using the
standard AT commands.
2.1.1.
AT Command Definitions
This document uses the following syntactical definitions:
1.
Special text fonts represent particular commands, keywords, variables, or
window sessions
2.
Color text indicates cross-reference hyper links to supplemental information
3.
Command notation indicates commands, subcommands, or command elements
Following table describes the text conventions used in this manual for software
procedures that are explained using the AT command line interface.
Table 3: Command Definition.
Convention Type
Description
[ ]
Square brackets
Enclose optional parameters. Choose none; or select one or more an unlimited
number of times each. Do not enter brackets as part of any command.
[parm1|parm2|parm3]
?
Question mark
Used with the square brackets to limit the immediately following token to one
occurrence
<CR>
Carriage return
Each command is terminated by a carriage return.
<LF>
Line feed
Each command is terminated by a line feed.
<CR> <LF>
Carriage return Line feed
Each response is started with a carriage return and line feed with some
exceptions.
< >
Angle brackets
Enclose a numeric range, endpoints inclusive. Do not enter angle brackets as
part of any command.
<SSID>
=
Equal sign
Separates the variable from explanatory text. Is entered as part of the
command.
PROCESSID = <CID>
.
dot (period)
Allows the repetition of the element that immediately follows it multiple times.
Do not enter as part of the command.
.AA:NN can be expanded to 1:01 1:02 1:03.
A.B.C.D
IP address
IPv4-style address.
10.0.11.123
