WE310F5-X IP2WiFi Legacy AT Command Reference Guide
80664ST11079A Rev. 3
Page 47 of 79
2021-10-25
Not Subject to NDA
Command Syntax
AT+WPSK=<PSK>
Parameter Description
Table 53: WPA-PSK and WPA2-PSK Key Parameters.
Parameter
Optional/Mandatory
Value
Description
PSK
Mandatory
32-byte key PSK is a 32-byte key, formatted as an ASCII
hexadecimal number, and other length or format is
considered invalid.
Synchronous Response
Table 54: WPA-PSK and WPA2-PSK Key Synchronous Response.
Responses
Remarks
OK
Success
After the PSK has been entered, the commands AT&W (to save the
relevant profile) and AT&Y (to ensure that the profile containing the
new PSK is the default profile) should be issued. The PSK will then be
available when the Telit node awakens from Standby.
ERROR:INVALID INPUT
Invalid PSK (if PSK is not 32 bytes)
Example
AT+WPSK=00010203040506070809000102030405060708090001020304050607
08090001
OK
AT&W0
OK
AT+WA=TelitDemo,,11
IP
SubNet
Gateway 192.168.1.99:255.255.255.0:192.168.1.1 OK
AT+PSSTBY=1000
Out of StandBy-Timer
AT+WA=TelitDemo,,11
IP
SubNet
Gateway 192.168.1.99:255.255.255.0:192.168.1.1
OK
7.2.3.
Scanning
Command Description
This command is used to scan for networks with the specified parameters and displays
the results. Scanning can be performed to find networks with specific SSID or in a
particular operating channel, or a combination of these parameters. Scanning for a
specific SSID employs active scanning, in which probe requests are transmitted with the
SSID fields being filled appropriately.
