WE310F5-X IP2WiFi Legacy AT Command Reference Guide
80664ST11079A Rev. 3
Page 27 of 79
2021-10-25
Not Subject to NDA
Responses
Remarks
STORED PROFILE 1
E1 V1 B=9600,8,N,1 &K0 &R0
+NDHCP=0 +NSET=192.168.1.99,255.255.255.0,192.168.1.1
+DNS1=0.0.0.0, +DNS2=0.0.0.0
+WM=0 +WAUTO=0,"GSDemoKit",,6
+WRETRY=5 +WP=0 +WRXPS=1 +WRXACTIVE=0
+NAUTO=0,1,192.168.1.1,8
+WAUTH=0 +WWPA="Serial2Wifi"+PSK-valid=0 +SSID=
+WWEP1=1234WWEP2=
+WWEP3= +WWEP4=
S0=01000 S1=00500 S2=00500 S3=00003 S4=00010 S5=00150 S6=00050
S7=00020 S8=01400
+BDATA=0+WSEC=0+ASYNCMSG=0
STORED PROFILE 1
E1 V1 B=9600,8,N,1 &K0 &R0
+NDHCP=0 +NSET=192.168.1.99,255.255.255.0,192.168.1.1
+DNS1=0.0.0.0, +DNS2=0.0.0.0
+WM=0 +WAUTO=0,"GSDemoKit",,6
+WRETRY=5 +WP=0 +WRXPS=1 +WRXACTIVE=0
+NAUTO=0,1,192.168.1.1,8
+WAUTH=0 +WWPA="Serial2Wifi"+PSK-valid=0 +SSID=
+WWEP1=1234WWEP2=
+WWEP3= +WWEP4=
S0=01000 S1=00500 S2=00500 S3=00003 S4=00010 S5=00150 S6=00050
S7=00020 S8=01400
+BDATA=0+WSEC=0+ASYNCMSG=0
OK
Success
6.4.2.
Save Profile
Command Description
This command is used to save the current profile. Upon deployment of this command,
the current configuration settings are stored in non-volatile memory under the specified
profile, (profile 0, or profile 1). In order to ensure that these parameters are restored
after power cycling the Telit node, the command AT&Y must also be issued, using the
same profile number selected here.
Command Syntax
AT&Wn
Parameter Description
Table 20: Save Profile Parameters.
Parameter
Optional/Mandatory
Value
Description
n
Mandatory
0
For profile 0
1
For profile 1
Saves the profile specified by n (0 or 1).
