WE310F5-X IP2WiFi Legacy AT Command Reference Guide
80664ST11079A Rev. 3
Page 51 of 79
2021-10-25
Not Subject to NDA
Synchronous Response
Table 58: Association Synchronous Response.
Responses
Remarks
IP SubNet Gateway IPaddress:
SubNetaddress: Gateway address
Success
ERROR:INVALID INPUT
If parameters are not valid.
ERROR
Reissue the AT+LOGLVL command to get more details about the kind
of error.
Response changes based on LOGLVL.
ERROR:IP CONFIG FAIL
If DHCP fails in infrastructure mode.
Example
AT+WA=TelitDemo,,11
IP
SubNet
Gateway 192.168.1.99:255.255.255.0:192.168.1.1
OK
7.2.5.
Disassociation
Command Description
This command is used to disassociate the current infrastructure / ad-hoc network or
stop the limited AP created by the node. It is also used to disconnect P2P mode.
Command Syntax
AT+WD
Synchronous Response
Table 59: Disassociation Synchronous Response.
Responses
Remarks
OK
Success
Asynchronous Response
Table 60: Disassociation Asynchronous Response.
Responses
Remarks
Disassociation Event
AP resets or connection to the AP is lost.
Example
AT+WD
OK