TELES VoIP Box BRI Series, Reference Manual

Page: 51 / 226

3 VoIPBox installation
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 51
–
RegId
contains the IP or hostname of the registrar
followed by a colon on the port number.
–
RegOwnId
typically contains your host name or tele-
phone number followed by an @ sign and a domain
name or IP address.
– Set user name and password as
RegUser
and
RegPwd
.
For a test call do the following steps:
|
If not done, connect the VoIPBox DSL / VoIPBox BRI with
the PBX, IP network/DSL and power supply (see
Chapter 3.6 on page 35
→)
.
|
Check the registration state on VoIP Statistics with the
GATE Manager. If the registration is not successful (not
registered, timeout) check and correct the settings and
activate the new configuration.
|
Send a call from a connected telefone to a public
number.
;;; SIP profile
p
;;; ---------------------
[Voip:PeerA]
VoipDirection=IO
VoipPeerAddress= ;; ip address:port e.g. 1.2.3.4:5060
VoipIpMask=0xffffffff
VoipSignalling=1
VoipUser=
VoipPwd=
;VoipOwnAddress= ; optional
VoipRegistrar=rega
VoipMaxChan=60
VoipCompression=g711a g711u g729a g729b
#[Registrar:rega] # q
#RegId= ;; ip address:port e.g. 1.2.3.4:5060
#RegOwnId=user@1.2.3.4
#RegUser=
#RegPwd=
#RegSignalling=1
;*END CONFIG*
Table 3.6 VoIP configuration in a route.cfg (continued)