TELES VoIP Box BRI Series, Reference Manual

Page: 75 / 226

4 Configuration files
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 75
All calls coming from BRI controller 9 (PSTN) are sent to BRI
controller 10 (PBX). First, the Restrict command adds the pre-
fix “pl” to the DAD of the received call for all calls coming from
<sin> The service indicator variable
sin
re-
stricts the command to one service.
Without a
sin
, the
Restrict
command
is valid for all services.
Possible service indicator values are:
01
Telephony
02 Analog services
03 X.21-services
04 Telefax group 4
05 Videotext (64 kbps)
07 Data transfer 64 kbps
08 X.25-services
09 Teletext 64
10 Mixed mode
15 Used internally for call-
ing-party manipulation
16 Video telephone
2
D<diverting num-
ber> For calls that have been diverted by the
network, RestrictD replaces the con-
tents in <diverting number> by the
contents in <pl>. Only in combination
with the service indicator 15. 59 for the
diverting
number
R<calling number> For calls that are redirected with
Redirect3
, the original OAD can be
changed again using
RestrictR
. Only in
combination with service indicator 15.
59 for the
calling
number
T<calling number> For calls that are redirected with
Redirect2
, the original OAD can be
changed again using
RestrictT
. Only in
combination with service indicator 15.
59 for the
calling
number
Table 4.14
route.cfg
: Restrict Parameters (continued)
Restrict<controller><calling number>=<pl> <sin> |
RestrictD<diverting number>=<pl> 15
RestrictR<calling number>=<pl> 15
RestrictT<calling number>=<pl> 15
Parameter Description No. Dig-
its
Optional