TELES VoIP Box BRI Series Reference Manual Download Page 147

Page: 147 / 226

7 System maintenance and soft-

ware update

VoIPBox DSL / VoIPBox BRI – version 21.0.009

Page 147

7.3 ipupdate - DynDNS client

This function allows you to assign a defined hostname to an

IP address that changes dynamically. This means that you can

always reach a device or service through the public IP net-

work, even if, for example, it is a common DSL connection

with dynamic IP address allocation. Several providers support

this service.

Error in ip.cfg line <line>: parameter "<parameter_name>" does not belong to any Sec-

tion

There is an error in the NAT Configuration

The NAT was not loaded, please check the Configuration for mistakes

There is an error in the DHCPD Configuration

The DHCP SERVER was not loaded, please check the Configuration for mistakes

There is an error in the ALTQD Configuration

The ALTQD SERVER was not loaded, please check the Configuration for mistakes

There is an error in the FIREWALL Configuration

The FIREWALL was not loaded, please check the Configuration for mistakes

Error in <dsl_interface> Connection failed. Please, connect a cable in the <ethernet>

port

Error in <dsl_interface>: Connection Failed. Please, revise your Username/Password

configuration

Error in <dsl_interface>: Connection Failed. Please, revise the DSL Modem

Table 7.2

Protocol.log

status and error messages (page 4 of 4)

Message

Definition

The following software package must be installed:

ipup-

date.tz2

Summary of Contents for VoIP Box BRI Series



































































































































































































































Search results

Summary of Contents for VoIP Box BRI Series

Reviews:

Related manuals for VoIP Box BRI Series

Brands by name

Popular brands

TELES VoIP Box BRI Series, Reference Manual

Search results

Summary of Contents for VoIP Box BRI Series

Reviews:

Related manuals for VoIP Box BRI Series

Brands by name

Popular brands