TELES VoIP Box BRI Series, Reference Manual

Page: 132 / 226

6 Signaling and routing features
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 132
6.11.1 Routing calls without a destination number
Enter the following configuration in the
route.cfg
if the
VoIPBox must route calls that come in without a destination
number:
Incoming calls from the configured port will be assigned a
placeholder and then all calls beginning with the placeholder
will be routed to the placeholder’s placeholder’s mapping.
In the following example, all calls from controller 9 are routed
to controller 10, regardless of whether a destination number
appears in the setup.
6.11.2 Routing calls based on existence of destination
number
To route calls with a DAD differently from those without a
DAD, you must activate the block feature in the
pabx.cfg
and
restart the system:
Set all other parameters in the
route.cfg
. First define the port
from which the incoming calls are to be routed. Incoming calls
from the configured port will be assigned a placeholder and
then digit collection will occur for all calls beginning with the
Restrict<port>=<pl>
MapAll<pl><num>=<port><num>
MapAll<pl>=<port>
Example 6.27 Routing without destionation number
Restrict9=pl
MapAllpl=10
Block=1