TELES VoIP Box BRI Series, Reference Manual

Page: 85 / 226

4 Configuration files
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 85
RegOwnId=<name@ip addr/domain>
Typically a host name or telephone number followed by an @ sign and a domain
name or IP address. The entry used in the
From:
field. The default setting is
RegUser@RegId
.
RegSameCallID=<mode>
When Yes is set (default), the same caller ID is always used for SIP registration. Set No
to change the caller ID for each SIP registration.
RegContact=<name or ip addr>
Used in the
Contact:
field.
RegContactParam=<string>
Sets additional header-parameters in the contact field (e.g.the q-value: RegContact-
Param=q=1.0).
RegUser=<name>
Enter a username for authorization.
RegPwd=<password>
Enter a password for authorization.
RegProxy=<ip addr>
Enter an alternative IP address if you want the request to be sent to an address other
than the one entered in
RegId
.
RegExpires=<sec>
Enter the number of seconds registration is to be valid. Default 0 means infinite.
RegPing=<sec>
Interval (in seconds) for the registrar ping. The VoIPBox sends an empty UDP packet
to the registrar’s IP address. The packet is essentially an alive packet to avoid possible
firewall problems.
RegSignalling=<int>
Determines the profile’s signaling protocol for registration with the SIP registrar.
1=SIP udp (default)
2=SIP tcp
3=SIP tls
RegUseReceived=<mode>
Enter Yes when an VoIPBox appears behind a NAT and STUN cannot be used. Default
No.
RegSameCallID=<mode>
The same call ID is used for SIP registration Enter No to change the call ID for every
reregistration. (default Yes).
Table 4.20
route.cfg
: Registrar Parameters (continued)
Registrar Parameters